VGA Extender 200M

Product Detail

Product Description

VGA extender by single CAT5e cable is composed by a Sender and a Receiver.It distributes 1 VGA input to 1 VGA display over a distance of 1-200m meters away without any signal loss by a UTP CAT5 cable.It is a cheap solution for VGA extension as CAT5 cable is very cheap cost.It supports high definition up to 1600X1200.It is rack-mountable.

Features
- 1 channel VGA+AUDIO input;
- 1 channel VGA+AUDIO output;
- Connect a PC host in and 1 CRT PC monitor or LCD over 200 meters away;
- USB power supply and 5V DC power supply input port for transmitter;
- 5V DC power supply for receiver;
- Transmission Media:UPT CAT5e Cable;
- Bandwidth:DC125MHz;
- Differential coefficient plus<0.5%;
- Differential coefficient plus< 0.5%

- SNR:60dB

Installation Guide:
Transmitter:
1.Connect VGA signal (to be send) to VGA IN
2.Connect audio signal (to be send) to AUDIO IN
3.Connect power supply plug to transmitter
4.5 reticle RJ45 Insert TP-OUT
5.Setup all K is shut.Please make switch is ON (when transfer distance > 200m)


Receiver:
2 VGA displays can be connected at the same time.But the lighteness will reduce when 2 displays are connected in.Please adjust the contrast, brightness, color.

1.Connect display input to VIDEO-OUT
2.Connect audio output to AUDIO-OUT.
3.5 reticle s RJ45 Insert TP.

CAT5e Cable:
CAT5e Cable should be parallel, can not appear cross over in twisted-pair.Seriation as follow:White orange / orange/ white green/ green / white blue / blue/white palm / palm.